PPE Gloves are gloves made of steel wire mixed with nylon weaving and other materials, which have strong anti-cutting and anti-slip properties. Wearing cut-resistant gloves, workers can hold the blade without being cut. Compared with ordinary thread gloves, the service life of a pair of cut-resistant gloves is equivalent to 500 pairs of ordinary thread gloves.
What is the main material of PPE Gloves?
What is the definition and role of PPE Gloves?
What are the characteristics of PPE Gloves?
Metal material stainless steel wire material
Made of stainless steel wire, it protects the arm from being scratched during the whole process of using the cutting machine. According to the needs of the work, this kind of cut-resistant gloves can be divided into three-finger and five-finger protection.
High Strength Polyethylene (HPPE)
High-strength polyethylene and glass fiber raw materials are the key to cotton yarn. BLADE X5 TM cotton yarn with new chemical fiber as the surface layer of cotton yarn has stronger cutting resistance. High-strength and high-modulus polyethylene chemical fiber (HPPE) is also a very good chemical fiber. Fiber cut resistant material.
PPE Gloves are actually a relatively common glove. The advantage of this type of glove is that it will not be easily cut by sharp objects such as knives, and can protect the user's hands to the greatest extent. Compared with ordinary gloves, the wear resistance and cut resistance of cut-resistant gloves are excellent. A single pair of cut-resistant gloves can top 500 pairs of ordinary thread gloves, which shows its thickness and firmness, so it has also been widely used. Applications. the
What is the standard for the classification of PPE Gloves? In fact, the standard of classification is based on the cut resistance level of the steel wire. The higher the grade, the more abrasion and cut resistant it will be. Wearing cut-resistant gloves, you can directly grab daggers and other sharp objects with your hands, even if the dagger is pulled out, your hands will remain intact. Therefore, cut-resistant gloves play an extremely important role in many security fields today.
PPE Gloves are a kind of cut-resistant gloves. They are made of many small rings. They can effectively protect hands from being hurt during operation. They are favored by many workers. So what are the characteristics of PPE Gloves?
1. High-quality stainless steel material, nylon belt.
2. It has excellent anti-abrasion, anti-cut and anti-puncture protection, comfortable to wear and easy to clean.
3. A single glove can be used interchangeably with both hands by adjusting the strap.
4. Safe and hygienic, easy to clean.
5. The protection level reaches level 5.
6. There are two options for cuffs, Velcro or buttons, which are easy to take off.
7. Fine workmanship, soft and comfortable to wear, no feeling of cutting hands at all.
As a manufacturer of safety products, HYCOM focuses on the development of high quality cut resistant PPEs.
The coop test assesses how well gloves protect against sharp object by counting the number of times a rotating blade moves back and forth over the fabric before it cuts through the glove sample.
A control sample material is tested both before and after testing the glove sample.
In each case, the sample is clamped in a holder, the aluminum foil enables the coop test machine to detect the moments of cook through by the blade gloves with higher levels of cook protection can blunt the blade during testing.
By comparing the results on a control sample material before and after testing the extent the blade is blunted can be estimated.
When the standard was updated in 2016 a maximum limit of 60 blade rotations was also introduced.
When the blade deteriorates only slightly a calculation correct for dulling of the blade during the test and the coop cut test performance level is rated 0 to 5. If the blade sharpness reduce by more than a factor of 3. It is mandatory to also assess gloves cut resistance using the ISO 13997 method. Most gloves achieving level 3 and above will need to be tested against the ISO test. The ISO 13997 cut resistance test more effectively assesses the level of cut resistance high cut protection gloves offer. The test sample is mounted on a mandrel like for the coupe test the aluminum foil enables the machine to detect the moment of cut through by the blade, the plastic film prevents false positive results when the glove material includes metallic yarns.
Once raised into place the cut resistance evaluator drives a straight edged blade across the glove sample until it cuts through and the distance moved by the blade until it is cut for twenty point two millimeters.
The test is run at least a further 19 times with different loads, each time cutting a new section of glove. Unlike the coupe cut test, the ISO 13997test does not suffer from blunting as each blade only passes once over the surface of the sample and is then replaced. The result are the plotted graphically and the graph is used to determine the force. That would be needed to cut the glove with a blade cutting distance of exactly 20 millimeters, it is this figure that determines the gloves cut performance level of A to F with F rated gloves providing the highest level of protection.
We recommend that this EN\ISO 13997 result is always selecting gloves medium or high cut risk environments.
Cut Resistant Glove Levels Explained
Hello, everyone. Today we will introduce cut resistant glove levels and which level is right for you.
When you’re buying gloves, it’s helpful to understand both US and European cut resistance classification systems. Many gloves sold in the US will show both.
In the US, the American National Standards Institute (ANSI) provides cut resistance ratings for gloves.
In Europe, the European Commission regulates cut resistance ratings. Their standard is called EN 388.
Let’s look at them one at a time.
The American Standard: ANSI/ISEA 105
· In 2016 ANSI and ISEA (International Safety Equipment Association) released an updated scale with 9 levels of cut protection. The levels indicate how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
· A1: 200 - 499 grams
· A2: 500 - 999 grams
· A3: 1000 - 1499 grams
· A4: 1500 - 2199 grams
· A5: 2200 - 2999 grams
· A6: 3000 - 3999 grams
· A7: 4000 - 4999 grams
· A8: 5000 - 5999 grams
· A9: 6000+ grams
When you’re looking at glove specifications, the ANSI cut level will be displayed inside a badge that resembles a shield. It looks like this:
The European Standard: EN 388
The European Commission’s standard includes two different cut resistance tests: the TDM-100 Test (the same machine that ANSI uses) and the Coup Test. That means, when looking at EN 388 cut levels for any glove you’re considering purchasing, you’ll want to look at these two different ratings:
EN 388 TDM-100 Cut Resistance Levels:
A: 2 - 4.9 newtons (204 - 508 grams)
B: 5 - 9.9 newtons (509 - 1019 grams)
C: 10 - 14.9 newtons (1020 - 1529 grams)
D: 15 - 21.9 newtons (1530 - 2242 grams)
E: 22 - 29.9 newtons (2243 - 3058 grams)
F: 30+ newtons (3059+ grams)
Note: Keep in mind that, due to different testing methods, ANSI and EN 388 ratings don’t always match up the way you’d expect them to based on the cutting load.
EN 388 Coup Test Levels:
Coup Test results are more complicated. A glove is assigned a cut level of 0 to 5 (with 5 being the most cut resistant) based on the material’s “cut index.” The cut index is a ratio that compares the material’s cut resistance to the cut resistance of cotton fabric.
One of the issues with the Coup Test is that certain materials (like glass and steel) can cause the Coup Test blade to dull during the test, which results in less accurate ratings. That’s why you may not see a Coup Test number when looking at certain gloves. In that case, just look at the TDM rating instead.
Here’s more information on how to read EN 388 markings and where to look for the cut level ratings.
And here’s an example:
Look at the numbers and letters along the bottom. The X signifies that there is no Coup Test result. You can also see that this glove received a D rating on its TDM-100 Test.
In case you’re interested, the other numbers and letters represent ratings for other protective factors. Here’s what each one means (left to right):
3: Abrasion rating
X: Cut (Coup Test) rating
4: Tear rating
4: Puncture rating
D: Cut (TDM-100) rating
P: Impact protection rating (P means it passed the impact protection test, which is a pass/fail test)
Who needs the highest level of cut protection? Look for a cut resistance level of A5 or higher (ANSI) and/or E to F (EN 388) if you need gloves for jobs like:
· Heavy construction
· Anything that puts you at high risk for cuts and lacerations
What about mid-level cut resistance? Look for a cut level of between A3 and A5 (ANSI) and/or C to E (EN 388) if you need gloves for jobs that require good cut resistance but also a high level of dexterity, such as:
· Recycling plants
· Salvage yards
· Electrical work
· Home maintenance work
When is it safe to choose gloves with less cut protection? Consider gloves with less protection when your risk of cuts and punctures is very low, and when the injury would be very minor if a cut did occur. This kind of glove is a great option when you need something agile and comfortable with minimal protection, potentially for jobs like:
· Glass artistry
· Catering and food industry jobs
· Some types of electrical work
· Some types of sheet metal work
Follow us and you will know more about cut resistant gloves.
Personal Protective Equipment (PPE) is an essential part of any workplace safety plan. It includes clothing, footwear, and other items that help protect workers from potential hazards while they are on the job. PPE can range from simple items such as gloves and safety glasses to more complex items such as full body suits and respirators. As technology advances and workplaces become increasingly hazardous, the importance of the right PPE cannot be overstated. In this blog post, we will explore what the function of ppe clothing is, how it works and why it’s so important for workplace safety.
What is ppe clothing?
How ppe clothing protects you
What to look for when choosing ppe clothing
Personal protective equipment (PPE) is clothing or equipment designed to protect workers from physical or chemical hazards. PPE can include items such as gloves, safety glasses and shoes, earplugs or muffs, hard hats, respirators, or coveralls. PPE is important because it helps to create a barrier between the worker and the hazard, and it also helps to reduce the exposure of the worker to the hazard.
When choosing PPE, it is important to select items that are appropriate for the specific hazard. For example, if you are working with chemicals, you would want to choose gloves that are resistant to the particular type of chemical you are using. It is also important to make sure that the PPE fits properly. If PPE does not fit properly, it can actually be more dangerous than not wearing any PPE at all.
When it comes to personal protective equipment (PPE), clothing is one of the first lines of defense against workplace hazards. ppe clothing helps create a barrier between you and the hazard, reducing your exposure to the hazard. Depending on the type of hazard you are facing, different types of ppe clothing may be required.
Some common examples of ppe clothing include:
- Gloves: protect your hands from contact with hazardous materials
- Aprons: protect your body from contact with hazardous materials
- Face masks: protect your lungs from airborne hazards
- Earplugs or earmuffs: protect your ears from loud noises or harmful chemicals
- Safety glasses: protect your eyes from dust, debris, or liquids
When choosing ppe clothing, it is important to consider the following factors:
-The type of hazard you will be exposed to: There are different types of ppe clothing designed to protect against different hazards. Make sure you choose the right type of clothing for the hazard you will be exposed to.
-The level of protection you need: Some ppe clothing provides more protection than others. Consider how much protection you need and choose accordingly.
-Comfort and fit: You will be wearing your ppe clothing for long periods of time, so make sure it is comfortable and fits well. Otherwise, you may be tempted to take it off, which defeats the purpose of wearing it in the first place.
HYCOM focuses on the development of high quality PPEs since 2000. Our industry-leading R&D team and skilled manufacturing team, mean we develop qualified PPEs you need, at competitive prices. We've helped world leading PPE brands tackle their PPE products challenges, during the last 20 years. Let us boom your PPE business as well.
I am talking with some quick tips for purchasing cut resistant gloves with different test standard.
So choosing the right glove for your application can be a challenge and existing gloves are subject to two different safety standard based on two different testing methods.
ANSI 105 is the most accepted standard in North American. This rating is indicated by capital A followed by a number between 1 and 9 and is reflective of the amount of weight applied to a blade in order to cut through the material.
The average of all the test scores in converted into the 9 level classification, scales reported as A1 to A9. This scale ranges from 200 gram of cut resistance to 6000 gram of cut resistance. This rating system replaces the previous 1 to 5 rating scales the new segmented rating system has removed previous gaps and helps reduce the usage of insufficient PPE by making it easier to clearly identify the level of protection your PPE provides for you.
So for example the A4 we see on the glove tell us it has a cut resistance rating of 4 on the 1 to 9 scale.
The other standard is European standard EN388 which utilized a CE score, the measure the glove resistance in 4 different areas Abrasion, Cut, Tear, Puncture. The current EN388 cut standards requires all hand protection to be tested on the coop cut test machine.
The coop cut test used a circular blade that moves back and forth across the sample fabric under a fixed weight of 500 grams to the number of rotations needed to cut through the fabric are counted in a ratio is reported comparing the PPE fabric sample to a control sample the ratio is given an index and that index is applied to a 1 through 5 rating scale.
Here, I won’t comment which is better testing method used by these two governing bodies, but I will note that the method used to generate the CE blade cut score is generally not considered to be as accurate as the anti cut score especially with higher strength materials.
Thanks for following us, If you have any comments or want some gloves need to know, please leave message to us. Thank you.